Printing on special media
66
2. Media and Tray
10
Card stock/ Custom-sized paper
•
Do not print on media smaller than 98 mm (3.8 inches) wide or 148 mm (5.8
inches) long.
•
In the software application, set margins to at least 6.4 mm (0.25 inches) away
from the edges of the material.
11
Letterhead/Preprinted paper
•
Preprinted paper must be printed with heat-resistant ink that will not melt,
vaporize, or release hazardous emissions when subjected to the machine’s
fusing temperature of about 170°C (338 °F) for 0.1 second.
•
Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
•
Forms should be sealed in a moisture-proof wrapping to prevent changes
during storage.
•
Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
Single-sided
Double-sided
Standard tray/
Optional dual cassette
feeder
Face up
Face down
Multi-purpose tray
Face down
Face up