E-
6
Selecting the Auto Mode
The room temperature and the fan speed are controlled
automatically in the Auto mode.
1
Press the
(ON/OFF) button to turn on the indoor unit.
(Do not press the
(ON/OFF) button if the remote
control is on).
Result:
The air conditioner will be turned on with the
mode selected when the unit was last used.
Caution
The air conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
Plugged in
Stopped
The air conditioner will start up after 3 minutes.
2
To select the Auto mode, press the
button until
is
displayed on the remote control.
Result:
The air conditioner will run in Auto mode.
3
To adjust the temperature, press the
buttons to set
the desired temperature.
The temperature can be set between 18°C(65°F) and
30°C(86°F).
Result:
The temperature is adjusted by 1°C(1°F) when
the
buttons are pressed.
MWR-SH00_IB_E_28134(2).indd 6
2009-03-02 ｿﾀﾈﾄ 2:16:32
