E-
4
Wired Remote Control and Accessories
The wired remote control should be installed by a
trained installer.
Make sure the main power is off before installing the
wired remote control.
The cables must be installed according to the national
wiring regulations and inside the wall for safety
reasons.
Always separate the communication cable and the
power cable to avoid malfunction of the unit.
(Connecting the power cable to the communication
terminal of the wired remote control will cause
serious damage to the wired remote control.
Make sure the wires are connected to the appropriate
terminals.)
Caution
Accessories
The following accessories are supplied with the air conditioner.
The number of each accessory is indicated in parentheses.
Cable Tie (2)
Cable Clamp(2)
M4X16 Screw(2)
User's manual(1)
Installation manual(1)
MWR-SH00_IM_E_28133.indd 4
2007-06-21 ｿﾀﾀ・10:48:36
