ENGLISH-14
Wired remote Controller Installation
Wired remote Controller Error Codes
Display
Description
Communication error between wired remote controller and indoor units (When communication is lost
for over 3 minutes after detecting the indoor unit and the wired remote controller)
No communication between Master(Main) and Slave(Sub) wired remote controllers.
No communication between wired remote controller and indoor units
- Exceeded maximum number of indoor unit connection (16 rooms)
- Reset is required after checking the number of indoor units
Two or more wired remote controllers set as Slave(SUB).
EEPROM Error
•
For the error codes for your indoor/outdoor units, refer to the installation manual of each device.
CaUtION
[Setting/Cancelling the Mode master indoor unit]
•
Mode master indoor unit setting is simply selecting an indoor unit that will become standard among many
indoor units to prevent mixed operation (which one or more indoor units operating in different operation mode).
- Setting: Connect just 1 indoor unit and stop the operation. Then press and hold the
[Mode]
button for 5
seconds to set the indoor unit as ‘Mode master indoor unit’.
- Cancelling: Connect just 1 indoor unit and stop the operation. Then press and hold the
[Fan Speed]
button
for 5 seconds to cancel the ‘Mode master indoor unit’ setting.
NOtE
SOL WRControl_IM_04148A-00_EN.indd 14
2013-09-25 오전 10:29:10
