E-
4
Getting Started
You have just purchased an ERV wired remote control and it has
been installed by your installation specialist.
Your User’s Manual contains much valuable information on using
your ERV wired remote control. Please take time to read it as it will help you
take full advantage of the unit’s features.
In this manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use 4 different symbols:
PRESS
PUSH
HOLD DOWN
Note
View of the Unit
When controlling multiple ventilators with one ERV wired remote
control, the ERV wired remote control displays the status of one
random ventilator only. If multiple ventilators are controlled by
one ERV wired remote control only and an external controller
is used to control one of the multiple ventilators, the ERV wired
remote control will display the status of the randomly selected
ventilator and it may differ from the status of some other
ventilators.
External device (Optional)
2-remote control indicator
Operation mode indicator
CO
2
sensor indicator
(Optional)
Air purifying mode indicator
(Optional)
Sleep mode indicator (Optional)
On/Off button
Mode selection button
Confirm/Cancel button
Time setting button
External control
indicator
Communication
error indicator
Centralized control
indicator
Fan speed
Filter sign indicator
Filter reset button
Fan speed
adjustment button
Set time & On/Off
timer setting
MWR-VH01_E_IB_27510.indd 4
2007-04-18 ソタネト 5:10:08