22
Wired Remote Controller Installation/Service Mode
The example of Wired Remote Controller option setting method
1. Press
Set
and
ESC
buttons at the same time for more than 3 seconds.
(Main menu) will be displayed and then press the [
∧
]/[
∨
] button to select no.1.
2. Press
[
＞
]
button to select the number you will set.
Press [
∧
]/[
∨
] button and select no.1
3. Press
[
＞
]
button to enter the data setting stage.
When you enter the setting stage, the current setting value will be displayed.
4. Press
[
＜
]
/
[
＞
]
button to select the desired Data1.
Press [<]/[>] button to select no.1.
The wired remote controller option is set from both cooling and heating
to cooling only.
5. Press
Set
button to complete the option setting.
Save the setting value and exit to sub menu.
6. Press
Esc
button to exit to normal mode.
1 2 3 4
Data bit
Data1: Both cooling and heating of an indoor unit
Data2: Use wireless remote controller
Data3: Master wired remote controller
Data4: Temperature display – Celsius (°C)
Example of data setting stage display
MWR-WE10_E_IM_32811-1.indd 22
2010-12-09 오후 4:41:14
Summary of Contents for MWR-WE10
Page 23: ...ENGLISH 23 Memo ...
Page 24: ......
