16
AA
Display
Description
Communication error between wired remote controller and indoor/ERV units after successful
communication.
No communication between Master(Main) and Slave(Sub) wired remote controllers.
No communication between wired remote controller and indoor/ERV units
Over 16 indoor/ERV indoor units installed.
Two or more wired remote controllers set as Slave(SUB).
Temperature sensor Open/Short error.
EEPROM Read, Write error
• For the error codes for your indoor/outdoor units and ventilator(ERV), refer to the installation manual of each
device.
[Setting/Cancelling the Mode master indoor unit]
• Mode master indoor unit setting is simply selecting an indoor unit that will become standard among many
indoor units to prevent mixed operation (which one or more indoor units operating in different operation
mode).
- Setting: Connect just 1 indoor unit and stop the operation. Then press and hold the Mode button for 5 seconds
to set the indoor unit as 'Mode master indoor unit'
- Cancelling: Connect just 1 indoor unit and stop the operation. Then press and hold the Fan speed button for 5
seconds to cancel the 'Mode master indoor unit' setting.
Wired Remote Controller Installation
Wired Remote Controller Error Codes
NASA_Wired Remote Control_MWR-WE10N_EN_IM_03716A(1).indd 16
2013-02-01 오후 6:34:11
