4. Troubleshooting
4.3. MICOM, MPEG Initialization & Update
■ MICOM Reset
•
During STANDBY mode, push the ‘STOP” Button 5 Seconds. If VFD blinking, reset is finished.
■ Micom Update (Only for Flash Micom)
•
Method 1) MAIN PCB
UTCN1
for update JIG. To update MICOM, it need Computer, Rom Writer, USB Cables.
•
Method 2) Insert USB Memory, and play. “Update” will be displayed. Set will be power off when finish.
•
Method 3) Insert Update DISC, and play. “Update” will be displayed. Set will be power off when finish.
■ Micom & MPEG Version Check
1) Power On.
2) CD open status.
3) Push the number
NEXT
for 5 seconds, check the MICOM version.
4) Push the number
PREVIOUS
for 5 seconds, check the MPEG version.
■ MPEG Update
1) Insert USB Memory or Update DISC which have Update file, and play. “Update” will be displayed.
2) When finish the Set will be power off → on automatically.
3) And then the Deck is automatically open.
■ MPEG Reset
1) During “No Disc” Displayed, push the stop Button 5 seconds. After displayed “INITIALIZE” set will power off
automatically.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4-7
Summary of Contents for MX-F730
Page 32: ...5 PCB Diagram 5 2 FRONT PCB Top FCN 1 1 5 2 Copyright 1995 2013 SAMSUNG All rights reserved ...
Page 34: ...5 PCB Diagram 5 3 FRONT PCB Bottom 5 4 Copyright 1995 2013 SAMSUNG All rights reserved ...
Page 38: ...5 PCB Diagram 5 5 MAIN PCB Bottom 5 8 Copyright 1995 2013 SAMSUNG All rights reserved ...
