4. Troubleshooting
4.3. MICOM, MPEG Initialization & Update
■ Micom Update (Only for Flash Micom)
•
Method 1) MAIN PCB
UTCN1
for update JIG. To update MICOM, it need Computer, Rom Writer, USB Cables.
•
Method 2) Insert USB Memory, and play. “Update” will be displayed. Set will be power off when finish.
■ Micom & MPEG Version Check
1) Power On.
2) CD open status.
3) Push the number
NEXT
for 5 seconds, check the MICOM version.
4) Push the number
PREVIOUS
for 5 seconds, check the MPEG version.
■ MPEG Update
1) Prepare Rom file at USB Memory.
2) Insert USB Memory, and play. ‘Update’ will be displayed. Set will be power off → on.
3) The Deck is automatically open.
■ MPEG/MAIN Reset
1) During “No Disc” displayed, push the stop Button 5 seconds. After displayed ‘INITIALIZE’ set will power off
automatically.
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4-9
Summary of Contents for MX-F870
Page 40: ...5 PCB Diagram 5 3 MAIN PCB Bottom 5 5 Copyright 1995 2013 SAMSUNG All rights reserved...
Page 41: ...5 PCB Diagram 5 4 FRONT JACK PCB Top Copyright 1995 2013 SAMSUNG All rights reserved 5 6...
Page 49: ...5 PCB Diagram 5 9 SPK LED PCB Bottom Copyright 1995 2013 SAMSUNG All rights reserved 5 14...
Page 52: ...5 PCB Diagram 5 11 SMPS PCB Bottom 5 17 Copyright 1995 2013 SAMSUNG All rights reserved...
