ENG - 10
• In mode other than “
BT
” (ex.
USB
,
AUX
mode), music is played only in MAIN Sound Tower and music
is not played in SUB Sound Tower.
• The lighting colors between MAIN Sound Tower and SUB Sound Tower may vary.
• This product does not support aptX audio stream with Stereo Group mode.
• If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode
may fail.
Terminate the Stereo Group mode
Press the
ADD STEREO
button (MAIN or SUB) for at least 5 seconds while the Stereo Group is
connected.
• Tone prompt and the LED above the
ADD STEREO
button is off.
LED Indications
LED
STATE
Description
Green
Blink
Waiting for a Stereo Group connection.
Solid
The Stereo Group connection is successful.
Red
Solid
There is an error with the Stereo Group connection.
Using Samsung TV and Stereo Group mode
Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound.
Left Sound Tower
(MAIN)
Right Sound Tower
(SUB)
1.
Connect two sound towers via stereo mode by press the ADD STEREO button on the two Sound
Tower.
2.
Connect the RCA cable to the
AUX2 OUT
on the MAIN and
AUX2 IN
on the SUB as shown by using
the RCA cable (not supplied).
3.
In “
BT
” mode, press the “
AUX
” button on the MAIN Sound Tower remote control for at least 5
seconds. The LED blinks on the ADD STEREO button.
