ENG - 11
4.
When the connection is complete, the “ADD STEREO” LED turn on and then the current output.
Tone prompt instead.
5.
When the connection is complete, the SUB top panel “AUX2” LED turn on.
• The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the
right channel sound. Press the
ADD STEREO
button on the MAIN or SUB Sound Tower to
change the sound channel of the Sound Tower.
6.
Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both
Sound Tower.
NOTES
• To use Stereo Group mode, both Sound Tower must be the same model.
• A red light on the LED on the
ADD STEREO
button indicates an error in the Stereo Group
connection. Try Step 1 to 5 again.
• In Stereo Group mode, the remote control,
BT PAIRING
,
GROUP PLAY
, and
(Source)
buttons on
the SUB Sound Tower are disabled.
• The
GROUP PLAY
button on the MAIN Sound Tower is not available in Stereo Group mode.
• If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on
the TV, and if you select “
Yes
”, it connects to the TV. If there is a previous connection history
between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a
simple connection to Samsung TV, refer to page 16.
• The lighting colors may vary between the MAIN Sound Tower and the SUB Sound Tower.
Terminating the Stereo Group mode connection
Press the
ADD STEREO
button (MAIN or SUB) for at least 5 seconds after the Stereo Group is
connected.
• “
OFF-STEREO MODE
” tone prompt and the LED on the
ADD STEREO
button turns off.
