ENG - 7
Connecting the wireless Group Play mode
You can connect up to ten Party Audio systems with the wireless Group Play function.
GROUP PLAY
GROUP PLAY
GROUP PLAY
Host
Slave 1
Slave 2
1.
Press the
GROUP PLAY
button on the Host Party Audio system. The “
HOST
” message appears on
the display of the host Party Audio and the LED blinks on the
GROUP PLAY
button.
2.
Press the
GROUP PLAY
button on the 2nd Party Audio system (Slave 1). The “
GROUP PLAY
CONNECTED
” message appears on the display and the
GROUP PLAY
button on both systems
stops blinking.
3.
Press the
GROUP PLAY
button on the 3rd Party Audio system (Slave 2). The “
GROUP PLAY
CONNECTED
” message appears on the display and the
GROUP PLAY
button on the system stops
blinking.
4.
If you want to add more Party Audio systems, repeat step 3.
5.
Play music on the Host Party Audio. Sound outputs from all the connected systems.
NOTES
•
The wireless Group Play connection is available for any Party Audio system.
•
Environmental conditions or other factors with connected devices may have effect on playback
quality.
•
If the red LED is on the
GROUP PLAY
button, an error has occurred in the wireless Group Play
connection. Try step 1 to step 5 again.
•
The
ADD STEREO
button and
PAIRING
button on the slave Party Audio systems are not available
while in wireless Group Play mode.
•
The
ADD STEREO
button on the host Party Audio system is not available while in wireless Group
Play mode.
•
When adding a slave unit, if you press and hold
GROUP PLAY
on the slave, before the “
GROUP PLAY
CONNECTED
” message appears, it will become the Host unit instead.
Summary of Contents for MX-T40
Page 1: ...MX T40 USER MANUAL...
