4
Use the copper wire for the power cable
and use only rated cables and parts.
Make sure electrical circuit is correctly
connected.
Overheating may cause fire.
Install the cables with supplied cables
firmly. Fix them securely so that external
force is not exerted to the terminal board.
If the connection or fixing is incomplete, it can
cause trouble with a heat generation, electric
shock or fire.
Make sure that the power for AHU-KIT
is under maximum, and over minimum
voltage allowed.
It may cause electrical component malfunction
which can damage the product.
Make sure there is no leakage after installation.
Toxic gas may generate when refrigerant gas contacts with fire.
Make sure of a earthing.
Do not connect the earth wire to the gas pipe,
water pipe, lighting rod or telephone wire.
If earthing is incomplete, electric shock or fire
may occur.
Follow the instructions in this manual
to make sure that the condensed water
dripping from the drain hose runs out
properly and insulate the drain pipe so
that dew condensate does not generate.
Household goods may get wet if the drain pipe
is not properly installed.
Do not install the air conditioner in following places.
The place where there is mineral oil or arsenic acid.
- There is a chance that parts may get damaged due to burned resin.
The place where corrosive gas such as sulfurous acid gas generates from the vent pipe or air outlet.
- The copper pipe or connection pipe may corrode and refrigerant may leak.
The place where there is a machine that generates electromagnetic waves.
- The air conditioner may not operate normally due to control system.
The place where there is a danger of existing combustible gas, thinner or gasoline is handled.
- The place where carbon fiber or flammable dust is.
The place where like spa and shore.
The place with direct contact of outdoor humidity, dust and temperature.
Install the power cable and communication cable of the AHU-KIT at least 1m away from
electric appliances.
Noise may heard depending on the electric wave though the cables are installed away from electric
appliances.
Keep the space in front of AHU-KIT for maintenance.
The manufacturer is not responsible for the damage occurred by not keeping standard of the installation.
SAFETY INFORMATION
(Continued)
CAUTION
WARNING
MXD-A16K1X025A_E_31836-1.indd 4
2010-03-12 ｿﾀﾈﾄ 12:42:51
