Getting Started 6
Important!:
For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2.
Insert the smaller end of
the Travel Adapter into the
charger/accessory
connector on the lower
left side of your phone.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low Battery Indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Five bars (
) indicate a full charge.
•
An empty battery icon (
) indicates a near empty battery.
•
A blinking empty battery icon (
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turn Your Phone On
1.
Open the flip on your phone,
as shown.
2.
Press .
Note:
As with any other radio-transmitting
device, do not touch the antenna
while using your phone as this can
affect call quality and can cause the
phone to operate at a higher power
level than is necessary.
3.
The phone begins searching
for a network signal.
4.
Once the phone finds a signal,
the time, date, and day
appear in the second line of the display.
5.
You’re now ready to place and receive calls.
Correct
Incorrect
Press
