104 Using Options
•
If you are in an automobile, turn on the automobile’s ignition to supply power
to the adapter. In some vehicles, power to the cigarette lighter socket is alway
on and you do not need to turn on the ignition.
•
If the previous procedures do not activate the adapter, you may need to change
the fuse in the adapter. To remove the fuse from the adapter, unscrew the
adapter cap with a pair of pliers and remove the cap. Replace the fuse with an
8 amp fuse. In an automobile, you may need to replace the fuse in the cigarette
lighter socket.
When you connect the adapter to the cigarette lighter, the computer’s battery starts
charging immediately.
To prevent loss of data and possible damage to the computer,
unplug the auto adapter when starting and stopping the
automobile engine.
Memory Modules
You can increase system memory by installing optional memory modules. You
can install a 32, 64 or 128 MB modules.
To avoid possible system problems, use only approved
memory modules in your computer.
Before You Install Memory
To prevent personal injury and damage to the equipment,
follow the precautions listed here before installing a memory
module.
Take the following precautions when installing a memory module:
•
Before you remove the memory module compartment door, turn off the
computer, unplug the power cord, and remove the battery. Also, disconnect
any peripheral devices.
•
Before handling a memory module, discharge any static electricity by
touching a grounded surface or using a grounding wrist strap.
•
Do not insert objects with conductive material, such as metal screwdrivers or
graphite pencils, into the memory-module compartment.
