106 Using Options
a. Pull the tabs on the connector slot outward slightly, until the edge of
the memory module pops up (Figure 26).
Figure 26. Removing a Memory Module
b. Hold the memory module by the edges and pull it forward out of the
compartment.
5. Align the connector on the memory module with the connector of the slot.
6. Push the memory module into the slot at a slight angle until the connectors are
fully engaged (Figure 27).
Figure 27. Installing a Memory Module
7. Push down on the edge of the memory module until the module snaps into
place.
8. Align the memory module compartment door with the compartment and push
the door down until it snaps into place.
9. Reinstall the screw you removed in step 2.
10. Turn on the computer and perform a complete POST to check the memory
integrity.
Tab
Tab
