67
Using "PCoIP"
2
2 Using "PCoIP"
2.4.12
Firmwre Update
Using the
Firmwre Update
page, change the
Teradici Firmware
.
Configuring the settings
1
Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2
Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3
Log in (
Log In
) and select
Upload
Firmware
. The
Firmware Upload
page appears.
(See the image below.)
4
Select a
Firmware
to replace the logo and press
Upload
.
5
Once upload is complete, the
Reset
button appears. Click the
Reset
button to reboot the client.
Go to
Options
Information
, and view the
Firmware Version
information.
