24 English
Sur
fac
e c
ooking
Surface cooking
Digital display
•
Power Boost : Use this setting to heat up the contents of a pot or pan faster
than the maximum power level " " (Hi).
•
Displayed if an element knob was set to an On position after the Sabbath
or Self-clean mode has ended or been cancelled, and the range was not able to
detect a pot or pan on the burner within one minute. To return the display to
normal and use the cooktop, set the knob to the Off position.
•
Error message. Displayed if the Induction cooktop has overheated because
of abnormal operation. Example : Operating with empty cookware.
•
Error message. Displayed if the cookware on an element is unsuitable or too
small or if no cookware has been placed on the cooking zone.
•
,
Displayed when the Sabbath or Self-clean mode is operating.
How to set the appliance for cooktop cooking
CAUTION
•
The cooktop elements may be hot even when off and burns can occur. Do not
touch the cooktop elements until they have cooled down sufficiently.
•
Never leave cooking food unattended when you set the heating element to 6
or higher. Boilovers cause smoke. Greasy spillovers may catch on fire.
•
Be sure you turn the control knob to
OFF
when you finish cooking.
Induction cooktop control knob
1
1
2
1.
Push the knob in.
2.
Turn in either direction to the setting
you want.
3.
The digital displays will show " - ", "
" or " ".
•
Move the Knob dial until the
desired power level setting
appears in the digital display:
(Lo), (Simmer), to (Hi),
(Boost).
NOTE
Should one or more of the cooking zones switch off before the indicated time has
elapsed, see the "Troubleshooting" section. (page
NE58K9560WS_AA_AC_DG68-00722A-07_EN.indd 24
2019-01-21 11:26:29