22
3. Disassembly and Reassembly
3-14 Removing Handle-Door and Glass-Inner (Continued)
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may
be present, and you can cut yourself if you are not careful.
Parts
Explanation Photo
Explanation
Door
1.
Remove the oven door from
the range (see page 29 for the
procedure.)
2.
Place the oven door on a padded
work surface with the front glass
facing down.
3.
Remove 3 bottom screws from the
door.
4.
Remove 2 Handle-screws from the
door.
5.
Lift the door rear assembly off the
front assembly and set it aside
6.
Remove 2 spacers and 2 screws.
