32 English
Oper
ating the o
v
en
Operating the oven
Extra features
Thermostat adjustment
The temperature in the oven has been preset at the factory. When first using the
oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, the temperature in the oven can be adjusted. Before adjusting,
test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
The oven temperature can be adjusted ±35 °F (±19 °C).
How to adjust the oven temperature
1.
Press
Broil
and
1
at the same time for 3 seconds.
The display will show
AdJ 0
.
2.
Enter the adjustment you want, eg. 20 °F, using the number pad.
You can adjust the temperature so that it is lower than the factory setting by
pressing
Broil
.
3.
Press
START/SET
.
NOTE
This adjustment will not affect the broiling or the self-cleaning temperatures. The
adjustment will be retained in memory after a power failure.
Fahrenheit or Celsius temperature selection
The oven control can be programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Centigrade or from Centigrade to
Fahrenheit
1.
Press
Broil
and
2
at the same time for 3 seconds.
The display shows
F
(Fahrenheit) or
C
(Centigrade).
The default is F.
2.
Press
0
to select F or C.
Pressing
0
changes the display between F and C.
3.
Press
START/SET
.
Convection auto conversion feature
When you use the auto conversion feature, the convection auto conversion feature
will automatically convert entered regular baking temperatures to convection
baking temperatures.
If this feature is activated, the display will show the actual converted (reduced)
temperature. For example, if you enter a regular recipe temperature of 350 °F and
press
START/SET
, the display will show the converted temperature of 325 °F.
How to disable or enable the auto conversion feature
1.
Press
Broil
and
3
at the same time for 3 seconds.
The display will show
Con On
(enabled) or
Con OFF
(disabled).
The default setting is Con OFF.
2.
Press
0
to select Con On or Con OFF.
Pressing
0
changes the mode between Con On and Con OFF.
3.
Press
START/SET
.
Summary of Contents for NE59 663 Series
