maintaining your appliance _
64
MAINT
AINING Y
OUR APPLIANCE
3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
Hinge lock
Unlocked position
Locked position
5. Close the oven door.
reMoVinG and rePLacinG the WarMinG draWer
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Pull out the drawer until it stops
2. Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
Lever
Push down on the left guide
Lever
Pull up on the right guide
3. Pull the warming drawer away from the range.
How to replace the warming drawer
1. Position the ends of the full-extension roller guide rails in
the side rails in the drawer opening.
2. Push in the drawer to close it and snap the locking clips into place.
right roller guide rail
NE597N0PBSR_BEST_DG68-00429A_EN_120412.indd 64
2012-04-12 �� 11:59:31