SURF
A
CE COOKING
Surface cooking _
18
Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
1
5
2
3
4
6
1. Single element:
Left rear
2. Single element:
Right rear
3. Dual element:
Left front
4. Dual element:
Right front
5. Warming center:
Center rear
6. Hot surface indicator
Hot surface indicator
•
Comes on when the unit is turned on or hot to the touch.
•
Stays on even after the unit is turned off.
•
Glows until the unit is cooled to approximately 150 °F.
Cooking areas
•
The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
•
Pans should not extend more than ½” to 1” beyond the cooking area.
•
When a control is turned on, a glow can be seen through the glass cooking surface.
The
element will cycle on and off to maintain the preset heat setting, even at high settings.
•
For more information on selecting proper types of cookware, refer to the section “Using the
proper cookware” on page 21.
NE595R0ABSR_AC_DG68-00425A-05_EN.indd 18
2015-02-27 �� 4:36:57