English 33
C
ookt
op c
ooking
Choosing the proper cookware
What your cookware is made of determines
how evenly and quickly heat is transferred
from the surface element to the pan bottom.
•
ALUMINUM
- Excellent heat conductor.
Some types of food will cause the
aluminum to darken. (Anodized aluminum
cookware resists staining & pitting.). If
aluminum pans are slid across the ceramic
cooktop, they may leave metal marks that
resemble scratches. Remove these marks
as soon as the cooktop cools down.
•
COPPER
- Excellent heat conductor but
discolors easily. May leave metal marks on
ceramic glass (see above).
•
STAINLESS STEEL
- Slow heat conductor
with uneven cooking results. Is durable,
easy to clean and resists staining.
•
CAST IRON
- A poor conductor; retains
heat very well. Cooks evenly once cooking
temperature is reached. Not recommended
for use on ceramic cooktops.
•
ENAMELWARE
- Heating characteristics
will vary depending on the base material.
Porcelain enamel coating must be smooth
to avoid scratching ceramic cooktops.
•
GLASS
- Slow heat conductor. Not
recommended for ceramic cooktop
surfaces because it may scratch the glass.
Protecting the smoothtop
Cleaning
• Clean the cooktop before using it for the
first time.
• Clean your cooktop daily or after each use.
This will keep your cooktop looking good
and can prevent damage.
• If a spillover occurs while you are cooking,
immediately clean the spill from the
cooking area while it is hot to prevent a
tough cleaning chore later. Using extreme
care, wipe the spill with a clean dry towel.
• Do not allow spills to remain on the
cooking area or the cooktop trim for a long
period of time.
•
Do not
use abrasive cleansing powders
or scouring pads which will scratch the
cooktop.
•
Do not
use chlorine bleach, ammonia,
or other cleansers not specifically
recommended for use on a glass-ceramic
surface.
NE59J7850WS_AA_DG68-XXXXXX_EN.indd 33
2015-01-21 11:24:06