40 English
Oper
ating the o
v
en
Operating the oven
Auto Conversion
When you use the auto conversion feature, the convection auto conversion feature
will automatically convert entered regular baking temperatures to convection
baking temperatures.
If this feature is activated, the display will show the actual converted (reduced)
temperature. For example, if you enter a regular recipe temperature of 350 °F and
press Oven Start/Set, the display will show the converted temperature of 325 °F.
(Default setting : off)
How to enable or disable the auto conversion feature
1.
Press
Options
for 3 seconds, and then Press
3
on the number pad.
2.
Press
1
(On) or
2
(Off) on the number pad.
3.
Press
START/SET
to save the changes.
Time of Day (12hr/24hr)
The oven control can be programmed to display time of day in the 12-hour or 24-
hour mode.
The oven has been preset at the factory to display in the 12-hour mode.
How to change between the 12- and 24-hour time of day display
1.
Press
Options
for 3 seconds, and then Press
4
on the number pad.
2.
Press
1
(--Hr) or
2
(12Hr) on the number pad.
3.
Press
START/SET
to save the changes.
12-hour energy saving
If you accidently leave the oven on, this feature will automatically turn off the
oven after 12-hours during baking functions or after 3 hours during a broil
function. (Default setting : on)
How to turn the 12-hour energy saving feature on or off
1.
Press
Options
for 3 seconds, and then Press
5
on the number pad.
2.
Press
1
(On) or
2
(Off) on the number pad.
3.
Press
START/SET
to save the changes.
Temp Adjust
The temperature in the oven has been calibrated at the factory. When first using
the oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, you can correct the temperature in the oven. Before correcting,
test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
The oven temperature can be adjusted ±35 °F (±19 °C ).
How to correct the oven temperature
1.
Press
Options
for 3 seconds, and then Press
1
on the number pad.
2.
Press
Clock
to select higher or lower than the current temperature.
3.
Enter the adjustment you want to make using the number pad. (0-35).
4.
Press
START/SET
to save the changes.
NOTE
This adjustment will not affect the broiling or the self-cleaning temperatures. The
adjustment will be retained in memory after a power failure.
Temp Unit (Fahrenheit or Celsius temperature selection)
You can program the oven control to display the temperature in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.
Press
Options
for 3 seconds, and then Press
2
on the number pad.
2.
Press
1
(Fahrenheit) or
2
(Celsius) on the number pad.
3.
Press
START/SET
to save the changes.
