48 English
Oper
ating the o
v
en
Operating the oven
Welcome Lighting
When you wake up the oven (such as using the dial knob, using the touch pad,
open the door), the knob lights blink each to welcome you.
Set the
Welcome Lighting
mode to On/Off. The default is on.
1.
Tap and hold
for 3 sec.
2.
Select
Welcome Lighting
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the changes.
Virtual Flame
TM
You can enable or disable the
Virtual Flame
TM
.
1.
Tap and hold
for 3 sec.
2.
Select
Virtual Flame
TM
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the changes.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1.
Tap and hold
for 3 sec.
2.
Select
Demo mode
using the dial knob.
3.
Turn the dial knob to select
On/Off
and push to save the changes.
Reset
You can reset your oven setting(More functions, System settings).
1.
Tap and hold
for 3 sec.
2.
Select
Reset
using the dial knob.
3.
Turn the dial knob to select
Cancel/Reset
.
CAUTION
Before reset the oven settings, turn off all oven and cooktop functions.
Smart control
How to connect the oven
1.
Download and open the SmartThings app on your smart device.
2.
Follow the app's on-screen instructions to connect your range.
3.
Once the process is complete, the connected icon located on your range
displays and the app will confirm you are connected.
4.
If the connection icon does not turn on, follow the instruction on the app to
reconnect.
1
