background image

64  Users Manual

Sharing an Internet connection through a wireless network

By connecting your computer to another computer, which is connected to the Internet 
over a wired connection, through a wireless network (Peer-to- Peer), you can access 
the Internet from your computer.

To share an Internet connection, the computers should be connected to a 
computer-to-computer (peer-to-peer) wireless network.  For details, see 
“Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on 
page 45.
Also, one of the computers has to be connected to the Internet (external 
network).
The description for Sharing Internet access is for the operating system 
Windows XP Service Pack 2.

To share an Internet connection, complete the following procedures:

Step 1. Configuring a Internet connection sharing from the computer connected 
to the Internet.

Step 2. After completing the shared Internet connection configuration, check 
that the other computers can access the Internet through the shared Internet 
connection.

Step 1. Configuring Internet Sharing.

Configuring a shared Internet connection on the computer connected to the Internet.

1.

Click 

Start > Control Panel > Network and Internet Connections > Network 

Connections

.

2.

Right-click on the device connected to the Internet, the external network, and 
select Properties. 

Summary of Contents for NEON

































































































































Reviews: