English
11
Range Hood Care
Range Hood Care
Range Hood Care
Cleaning
IMPORTANT:
Clean the hood and baffle filters frequently according to the
following instructions. Replace the baffle filters before operating the hood.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or soap-
filled scouring pads to clean the hood.
Always wipe dry to avoid water marks.
Cleaning Method:
•
Liquid detergent soap and water or all-purpose cleanser
•
Wipe with a damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
•
Do not use cleaning agents containing bleach.
Stainless Steel Baffle Filter:
1.
Remove the filter by pulling the spring release handle, and
then pulling down the filter.
A
A. Spring release handle
2.
Wash the stainless steel baffle filter as needed in your dishwasher
or a hot detergent solution.
3.
To reinstall the filter, first make sure the spring release handles are
toward the front. Insert the stainless steel filter into the
upper track.
4.
Push in the spring release handle.
5.
Push up on the stainless steel filter, and then release the handle to
latch the filter into place.
WARNING
When removing the filter, please hold it with both hands to make sure it
does not fall.
Replacing an LED Lamp
The LED lights are replaceable by a service technician only. See the
support contact information in the Warranty section.
