Connecting to the Internet 49
If you do not know the network name when you connect to the AP, click
Scan
and select a network from the network name list displayed.
To construct a computer-to-computer wireless network, both computers have
to use the same network name.
6.
If a network key is configured in the AP or computer-to-computer wireless
network, select 'Enable Data Security' in [Set Security] window, and then enter the
same network key. Click
Next
.
For the network key (WEP KEY) of the AP, ask your AP or network
administrator.
You are recommended to use a network key (WEP KEY) when you construct
a computer-to-computer wireless network to prevent access from
unauthorized users. Create a new network key in the first computer, then enter
the previously created network key in the other computer.
The network key can be 5 or 13 alphanumeric characters (e.g. magic) or 10 or
26 hexadecimal digits (a combination of numbers "0" to "9" and letters "a" to
"f").
7.
In the [Power Management] window, click
Finish
.
To use maximum performance by default, select ’Off’. To minimize power
consumption, select ’On’.
This item is not displayed when you configure the computer-to-computer
wireless network settings.
