2. Press the <Fn> + <
> key. Provided that an external display device is con-
nected, the display option changes in LCD > CRT > LCD+CRT order whenever the
key is pressed.
■
Using Dual View to View an Extended Screen
You can expand the screen into two display devices and work conveniently in
separate workspaces.
In Dual View mode, you can select the screen resolution and color quality for
each display device, as if there were two separate graphics cards.
1. Connect the external display device (e.g. a monitor or a projector) to the corre-
sponding port of the system.
To connect a TV, connect the TV to the TV output port of the system.
(‘See P. 6-8 Connecting to a TV’)
2. Press touchpad right button on the desktop, click Properties, and then click the
Settings
tab.
3. Click the monitor ‘2’ icon, select the ‘Extend my Windows desktop
onto this monitor
’ check box, and then click Apply.
6-9
Chapter 6. Customizing your computer
Provided that multiple external display devices are connected, the display
order is LCD>CRT>TV>LCD+CRT>LCD+TV>LCD whenever the
<Fn>+<
> keys are pressed. In the DOS environment, the screen is
output to LCD and CRT in this sequence.
The TV function is not supported. In full screen DOS mode of Windows,
you cannot use the hot keys.
N
N
o
o
t
t
e
e
Summary of Contents for NP-P40
Page 171: ...1 16 Manual...
Page 227: ...4 30 Manual...
Page 239: ...5 12 Manual...
Page 253: ...6 14 Manual...