Connecting to the Internet 73
Using Samsung Network Manager
Samsung Network Manager is a program that has been developed to enable users to use
the network easily.
Samsung Network Manager provides the following features.
•
You can easily set up the network and printer settings.
•
You can immediately use the network without defining new network
settings again after moving locations.
By setting the network settings (IP address, printer settings, etc.) for each
location, you can immediately access the network without following network
setting procedures each time regardless of your location.
•
You can easily share Internet Access.
You can share your Internet connection by setting up a computer with 2 LAN
interfaces (wired and wireless, or 2 wired LAN) as the sharing server. Then,
you can access the Internet on a sharing client by connecting to the sharing
server.
•
You can diagnose the network status.
You can diagnose the network status when the network is not properly
connected.
Using the Network
This section describes the procedures to connect to the Internet by setting up a network.
The setting up procedures include the procedures to add a printer to the network.
The setting up procedures are different for wired and wireless LAN
connections.
To use a wireless LAN, there should be a wireless LAN AP available nearby.
Setting Up a Network
1.
To use a wired LAN, connect the LAN cable to the LAN port.
To use a wireless LAN, slide the Wireless LAN Latch into the ON position, if the
wireless LAN is turned off.
(
p4
)
When the wireless LAN is turned on, the Wireless LAN Operation LED (
)
lights up.
