145
3
When the file encryption
authentication window appears,
select
AuthenTec Fingerprint
Driver
, place your finger over the
fingerprint identification sensor and
push it down slowly. Alternatively,
select Integrated Password
Authentication and enter the login
password.
If your fingerprint is not recognized,
the fingerprint is displayed in red
in the fingerprint display window.
In this case, place your finger over
the fingerprint identification sensor
again and push it down slowly until
the fingerprint is displayed in green.
4
If the fingerprint is recognized, the
following window appears. Click OK
to
encrypt
the file.
Right-click over a folder or file to be
encrypted and select
OmniPass
Encrypt File(s)
from the pop-up
menu. The selected folder or file
will be encrypted.
Logging into Internet Sites
You can easily login to frequently used
Internet sites using the fingerprint
identification or password authentication
functions instead of entering your user ID
and password.
As an example, the procedures for
logging into the Hotmail site are
described below.
The following describes the procedures
for registering your user ID and
password. Once the user ID and
password of a site are registered, you
can login to the site automatically.
■ This function is applied to some
models only.
■ This function may not be
supported for some Internet sites.
1
Launch Internet Explorer ( ) and
open the Hotmail site. (http://www.
hotmail.com)
Enter your user ID and password.
2
Right-click over the ( ) icon in
the Taskbar and click on
Save
Password
.
