20
Your system is designed and tested
to meet the latest standards for safety
of information technology equipment.
However, to ensure safe use of this
product, it is important that the safety
instructions marked on the product and in
the documentation are followed.
Always follow these instructions to
help guard against personal injury
and damage to your system.
Setting Up your System
■ Read and follow all instructions marked
on the product and in the documentation
before you operate your system. Retain
all safety and operating instructions for
future use.
■ Do not use this product near water or a
heat source such as a radiator.
■ Set up the system on a stable work
surface.
■ The product should be operated only with
the type of power source indicated on the
rating label.
■ Ensure that the electrical outlet you are
using to power your equipment is easily
accessible in case of a fire or short circuit.
■ If your computer has a voltage selector
switch, make sure that the switch is in the
proper position for your area.
■ Openings in the computer case are
provided for ventilation. Do not block or
cover these openings. Make sure you
provide adequate space, at least 6 inches
(15 cm), around the system for ventilation
when you set up your work area.
Never insert objects of any kind into the
computer ventilation openings.
■ Ensure that the fan vents on the bottom
of the casing are clear at all times. Do
not place the computer on a soft surface,
doing so will block the bottom vents.
■ If you use an extension cord with this
system, make sure that the total power
rating on the products plugged into the
extension cord does not exceed the
extension cord power rating.
Important Safety Information
Safety instructions
