127
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed memory or add new memory.
Before You Start!
■
Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.
■
Disconnect mains power and remove the battery before continuing.
■
To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the same
manufacturer) is recommended.
■
Only use the same type of memory as specified in the Product Specification
Fixing Screw
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
2
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
