Troubleshooting 121
A
The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4
In the following cases, the screen blinks or displays noise for a short time:
(Click on the Graphics Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the System and then Change the
PowerMizer level.)
A
This may happen while the video driver is examining the connected device.
While detecting, any connected display devices may blink or some noise may
occur.
Q5
When I connect a projector, and change the setting to display screen image
on both the LCD and the projector by pressing <Fn>+<F4/
> keys, screen
is not displayed properly.
A
Press
<Fn>
+
<F4 /
>
keys once again.
If the same problem continues, it means the projector cannot support the
resolution. Lower the resolution to 1024 x 768.
Q6
The playback screen of a DVD title or an MPEG file is only displayed on the
LCD.
A
Video is displayed on a single display device by default, when both LCD and
CRT are selected simultaneously.
1.
Right-click over the Desktop and select
Properties
from the pop-up menu.
2.
In the [Display Properties] window, select the
Settings
tab
> Advanced >
CATALYST Control Center
tab.
3.
Click the
ATI CATALYST Control Center
button and run the
CATALYST
Control Center
.
4.
From the
View
menu, select the
Advanced View
item.
5.
Select
Avivo Video > Theater Mode
and set the
Clone Mode Overlay Display
item to
Theater Mode (Full Screen)
. You can then view the video on both LCD
and CRT.
Q7
After connecting to a TV, some programs such as Debug, Mem, etc. do not
run in full screen MS-DOS mode.
