70
Chapter 3.
Using the computer
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
Initializing the TPM chip erases all authentication
•
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
To initialize the TPM chip again while the TPM function is
•
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after re-
initialization.
1
Restart the computer.
When the Samsung logo screen appears, press the
F2
key
repeatedly.
2
If the BIOS screen appears, select the
Security > TPM
Configuration
item and press
Enter
.
Aptio Setup Utility
SysInfo
Supervisor Password
User Password
HDD Password
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
Advanced
Security
Boot
Clear
Clear
Clear
[Enter]
[Enter]
[Enter]
[Enabled]
▶
TPM Configuration
Exit
3
Set the
TPM Device
item to
Enabled
and set the
Change
TPM Status
to
Clear
.
Aptio Setup Utility
TPM Configuration
TPM Device
Change TPM Status
Security Chip State
Security
[Enabled]
[
No Change
]
Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
4
Press the
F10
key to save the changes.
Using the TPM Security Device
(Optional)
Summary of Contents for NP900X3D-A02US
Page 1: ...User Guide ...
