Disassembly and Assembly
32
Touchpad Remove
1
Using a cross-head screwdriver, remove the 5 screws on the touchpad.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
2
Using the tweezers, remove the Kapton tape from the touchpad connector.
Remove the touchpad module by pushing on the side of the touchpad module.
Keep the Kapton tape to reuse it for assembly.
1
2
3
After you finish disassembling, refer to
for how to reassemble.
