English 65
O
v
en (L
o
w
er O
v
en)
After a hybrid cleaning cycle
•
Take care when opening the door after a Hybrid cleaning procedure has
ended. The water on the bottom is hot.
•
Open the oven door and remove the remaining water with a sponge. Do not
leave the residual water in the oven for any length of time. Wipe the oven
clean and dry with a soft cloth. Do not forget to wipe under the oven door
seal.
•
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the
oven interior. Remove stubborn residue with a nylon scourer. You can remove
lime deposits with a cloth soaked in vinegar.
•
If the oven remains dirty, you can repeat the procedure once the oven has
cooled.
•
For heavy residue, such as grease left over from roasting, we recommend
that you rub detergent into the residue before activating the Hybrid cleaning
function.
•
After cleaning, leave the oven door open at a 15° angle to allow the interior
enamel surface to dry thoroughly.
NOTE
•
You will not be able to start a Hybrid cleaning cycle if the Control Lockout
feature is activated or if the oven’s temperature is too hot.
•
The oven doors lock automatically. The display will show the cleaning time
remaining. You cannot open the oven doors until the temperature drops to a
safe/cool temperature.
•
The Hybrid clean feature can be used in only one oven at a time. While one
oven is in Hybrid cleaning mode, you cannot use the other oven for cooking.
•
If the oven is not clean after one cycle, repeat the cycle.
•
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
START
4:35 PM
Hybrid Clean
Chemical and odor-free oven cleaning
Clean Time
90
min
5.
Tap
START
to begin Hybrid cleaning.
4:35 PM
Hybrid Clean
OK
Pour 20oz (600ml) of water into Water Reservoir.
6.
Follow the on-screen instructions.
Hybrid cleaning will start automatically
after the oven senses water in the
water reservoir.
NOTE
Both oven doors are locked during Hybrid
cleaning.
4:35 PM
Please wipe remaining residue from interior cavity.
Hybrid Clean
7.
When Hybrid cleaning is complete,
clean the oven's interior. There will be a
significant amount of water remaining
on the bottom of the oven after a Hybrid
cleaning cycle. Remove the residual
water with a sponge or soft dry cloth.
NOTE
For Hybrid cleaning, use exactly 20 oz. (600 ml) of water since this produces the
best results.
NQ70M7770D_AA_DE68-04447A-00_EN.indd 65
1/19/2017 12:01:12 PM