English 63
O
v
en (L
o
w
er O
v
en)
Using the gliding rack
The fully extendable Gliding rack makes food preparation easier, especially when
you are preparing heavier dishes. The Gliding rack has 2 glide tracks that allow
you to extend the rack well out of the oven without touching the sides of the oven
walls.
Installing the gliding rack
Rack
Guides
•
With the Gliding rack in the Closed
position and the oven off, carefully
insert the Gliding Rack between the
guides until the rack reaches the back.
•
When using the Gliding rack in the
oven, be sure to pull on the handle of
the rack only to slide it in and out. If
you grasp the frame while using the
rack, the entire Gliding rack will be
removed. Make sure you use oven mitts
when handling the Gliding rack during
cooking.
Before using the racks
Each rack has stops that need to be placed correctly on the supports. These stops
will keep the rack from coming completely out.
Removing the racks
1.
Pull the rack straight out until it stops.
2.
Lift up the front of the rack, and then pull it out.
Replacing the racks
1.
Place the end of the rack on the support.
2.
Tilt the front end up and push the rack in.
CAUTION
•
Do not cover a rack with aluminum
foil or place aluminum foil on the
oven bottom. This will hamper heat
circulation, resulting in poor baking,
and may damage the oven bottom.
•
Arrange the oven racks only when the
oven is cool.
NQ70M9770D_AA_DE68-04503A-02_EN+MES+CFR.indb 63
2018-10-05 4:17:19
Summary of Contents for NQ70M9770D Series
Page 91: ...English 91 Memo NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 17 26 ...
Page 183: ...Español 91 Notas NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 17 56 ...
Page 275: ...Français 91 Notes NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 18 27 ...