English 77
Maint
aining y
our applianc
e
A
B
A.
Oven door hinge lock in
locked position
B.
Oven door hinge lock in
unlocked position
3.
Open the oven door.
4.
Locate the oven door hinge locks in
both corners of the oven door, and then
rotate the hinge locks toward the oven
door to the unlocked position. If the
door hinge lock is not rotated fully (see
illustration B on the left for an example
of full rotation), you will not be able to
remove the door properly.
5.
Partially close the door to engage the
door latch locks. The door will stop at
this point.
6.
Using two hands, grasp the edges of
the oven door. Lift and pull the oven
door toward you and remove. You may
need to gently shift the door from side
to side as you pull.
7.
Remove the rubber cap, and then
disconnect the LED light's Wire Harness
from the bottom right of the door.
Removing the oven door (Lower oven only)
CAUTION
•
The door is very heavy. Be careful when removing and lifting the door.
•
Do not lift the door by the handle.
Use two hands to remove an oven door.
WARNING
For safety reasons, you can't remove the upper oven door.
A
A.
Wire Harness
1.
Prior to removing the oven door,
prepare a surface where you will place
it. This surface should be flat and
covered with a soft blanket. You can
also use the corner posts from your
packaging material.
2.
Disconnect the LED light's Wire Harness
from the bottom right of the door.
NQ70M9770D_AA_DE68-04503A-02_EN+MES+CFR.indb 77
2018-10-05 4:17:24
Summary of Contents for NQ70M9770D Series
Page 91: ...English 91 Memo NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 17 26 ...
Page 183: ...Español 91 Notas NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 17 56 ...
Page 275: ...Français 91 Notes NQ70M9770D_AA_DE68 04503A 02_EN MES CFR indb 91 2018 10 05 4 18 27 ...