54 English
Maint
aining y
our applianc
e
Maintaining your appliance
Changing the oven light
The oven light is a standard 40-watt appliance bulb. It will come on when the oven
door is open. When the oven door is closed, press the
pad to turn it on or off. It
will not work during a self-cleaning cycle.
Remove
Remove
Glass bulb cover
Glass bulb cover
Bulb
Bulb
Replace
Replace
1.
Make sure the oven and the bulb are
cool.
2.
Unplug the range or disconnect the
power.
3.
Turn the glass bulb cover in the back of
the oven counterclockwise to remove.
4.
Turn the bulb counterclockwise to
remove it from its socket.
5.
Insert a new 40-watt appliance bulb, and
then turn it clockwise to tighten. Replace
the bulb cover by turning clockwise.
6.
Plug in the range or reconnect the power.
CAUTION
Before changing your oven light bulb,
disconnect the electrical power to the range
at the main fuse or circuit breaker panel.
Make sure the oven and the bulb are cool.
Removing and reinstalling the storage drawer
1.
Slide open the drawer until it stops.
2.
Locate the roller guide clips on either
side. Using both hands, pull down the left
clip while lifting the right clip, and then
remove the drawer.
3.
Clean the drawer in warm, soapy water
using a cloth or soft brush. Then, rinse
and dry it thoroughly.
4.
Put the drawer in the roller guides on
either side, and then snap the clips into
place.
Summary of Contents for NSE6D 83 Series
Page 1: ...Electric Range User manual NSE6D 83...
Page 65: ...Memo...
