background image

English  11

Gas r

ang

e c
omponent

s

Self-cleaning oven safety

WARNING

To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the 
following precautions.

• 

The self-cleaning feature operates the oven at 
temperatures high enough to burn away food 
soils in the oven. The range is extremely hot 
during a self-cleaning cycle. 

Do not touch

 any 

surfaces of the range during a self-cleaning 
cycle.

• 

Keep children away from the oven during a self-cleaning cycle.

• 

Before starting a self-cleaning cycle, 

remove

 all racks, cookware, and utensils 

from the oven. Only porcelain-coated oven racks may be left in the oven.

• 

Before starting a self-cleaning cycle, wipe grease and food soils from the oven.

• Do not put

 the lower drawer into the oven cavity when you run a self-cleaning 

cycle.

• 

When opening the door after a self-cleaning cycle, stand away from the oven.

• 

If the self-cleaning cycle malfunctions, turn off the oven, disconnect the power 
supply, and contact a qualified service technician.

Gas range components

What’s in the box

Parts supplied

Template

Anti Tip Bracket (1) /  

Screws (4)

Filler Kit (1) & Screws (2)

• 

Make sure you have received all of the supplied parts shown above.

• 

If your range was damaged during shipping or you do not have all of the 
supplied parts, contact your local retailer.

01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd   11

01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd   11

2023-11-06   오전 11:47:45

2023-11-06   오전 11:47:45

Summary of Contents for NSG6D 8 Series



























Reviews: