English 7
Impor
tant saf
ety inf
ormation
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
•
Have your range installed and properly
grounded by a
qualified installer
, in accordance
with the installation instructions. Any
adjustment and service should be performed
only by qualified gas range installers or service
technicians.
• Do not attempt
to service, modify, or replace your range or any part of your
range unless it is specifically recommended in this manual. All other service
should be referred to a qualified technician.
•
Always use new flexible connectors when installing a gas appliance.
Do not use
old flexible connectors.
• Make sure
the anti-tip device is properly installed on the range. See the
installation instructions for more information.
•
Due to the size and weight of the range, have
two or more people
move the
range.
• Remove
all tape and packaging materials.
• Remove
all accessories from the cooktop, oven, and/or lower drawer. Grates and
griddles are heavy. Use caution when handling them.
• Make sure
no parts came loose during shipping.
Electrical and grounding safety
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.
•
Plug into a grounded 3 - prong outlet.
• Do not remove
the ground prong.
• Do not use
an adapter or an extension cord.
• Do not use
a damaged power plug, power cord,
or loose power outlet.
• Do not modify
the power plug, power cord, or
power outlet in any way.
• Do not put
a fuse in a neutral or ground circuit.
•
Use a dedicated 120 volt, 60 Hz, 20 amp, AC, fused electrical circuit for this
range. A time-delay fuse or circuit breaker is recommended. Do not plug more
than one appliance into this circuit.
• Do not connect
the ground wire to plastic plumbing lines, gas lines, or hot water
pipes.
•
This range
must be Earth grounded
. In the event of a malfunction or breakdown,
grounding will reduce the risk of electrical shock by providing a path for the
electric current. This range is equipped with a cord having a grounding plug.
The plug must be firmly plugged into an outlet that is properly installed and
grounded in accordance with the local codes and ordinances. If you are unsure
whether your electrical outlet is properly grounded, have it checked by a licensed
electrician.
•
The range is supplied with a 3 pronged grounded plug. This cord must be
plugged into a mating, grounded 3 prong outlet that meets all local codes and
ordinances. If codes permit the use of a separate ground wire, we recommend
that a qualified electrician determine the proper path for this ground wire.
•
Electrical service to the range must conform to local codes. Barring local codes,
it should meet the latest ANSI/NFPA No. 70 Latest Revision (for the U.S.) or the
Canadian Electrical Code CSA C22.1 – Latest Revisions.
•
It is the personal responsibility of the range owner to provide the correct
electrical service for this range.
01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd 7
01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd 7
2023-11-06 오전 11:47:44
2023-11-06 오전 11:47:44
