How to use the MANUAL mode
The user can manually set both the aperture value and the shutter speed.
How to use the DUAL IS (Dual Image Stabilization) mode
This mode will reduce the effect of camera shake and help you get a well-
exposed image in dim conditions.
■
Things to watch out for using the DUAL IS mode
- The digital zoom will not operate in the DUAL IS mode.
- If the lighting conditions are brighter than fluorescent lighting, the DUAL IS
doesn’t activate.
- If the subject is moving the final image captured may be blurred.
- Avoid moving the camera while the [Capturing!] message is displayed to
achieve a better result.
- As the DUAL IS uses the camera’s digital processor, images taken using the
DUAL IS may take a little longer for the camera to process.
1. Select the MANUAL mode by rotating the mode dial.
2. Select the desired shutter speed and aperture value
by using the smart button.
1. Select the DUAL IS mode by rotating the mode
dial.
2. Point the camera towards the subject and
compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
<< 22 >>
Starting the recording mode
Refer to page 44 ~ 45 for more information
about the menus.
