English - 32
cleaning and care
CATALYTIC ENAMEL SURFACE (OPTIONAL)
The removable cover casing is coated with a dark gray catalytic enamel this can become
coated with oil and fat distributed by circulating air during convection heating. These
deposits will burn off at oven temperatures of 200 °C and above.
1.
Remove all accessories from the oven.
2.
After cleaning all interior oven surfaces, set the oven to convection 250 °C for an
hour.
HAND CLEANING
CAUTION:
Make sure the oven and accessories are cool before cleaning.
Do not use abrasive cleaning agents, hard brushes, scouring pads or cloths, steel
wool, knives or other abrasive materials.
Oven Interior
•
For cleaning the interior of the oven, use a clean cloth and a mild cleaning
agent or warm soapy water.
•
Do not hand-clean the door seal.
•
To avoid damaging the enameled oven surfaces, only use customary oven
cleaners.
•
To remove stubborn soil, use a special oven cleaner.
Oven exterior
For cleaning the exterior of the oven such as oven door, handle and display, use
a clean cloth and a mild cleaning detergent or warm soapy water and dry with
kitchen roll or a dry towel.
Especially grease and dirt can remain around handle or keys because of hot air
coming from oven, so please clean handle and keys after you use the oven.
Accessories
Wash the accessories after every use and dry it with a tea towel. If necessary,
soak in warm soapy water for about 30 minutes for easier cleaning.
WATER COLLECTOR CLEANING
The water collector is for collecting the water from the
moisture when oven is operating with very moist food. Food
waste can be stack on the water collector. If the cleaning is
not performed, the built-in furniture can be damaged. Clean
the water collector to protect your furniture after cooking.
WARNING:
If you encounter a water leakage from the
water collector after the cooking, please contact us at
the service center.
Water collector
GEO Plus_NV70H3583LS_EU_DG68-00553A-00_EN.indb 32
2014-03-24 �� 6:03:45
