troubleshooting _
71
trou
BL
e
SH
oo
ti
NG
PROBLEM
POSSIBLE CAUSE
SOLUTION
Steam or smoke coming
from under the control
panel.
This is normal.
The oven vent is located there.
More steam is visible when using
the convection functions or
when baking or roasting multiple
items at the same time.
Burning or oily odor
emitting from the vent.
This is normal for a new oven
and will disappear within 1/2
hour of the first bake cycle.
To speed the process, set a self-
cleaning cycle for a minimum of
3 hours. (See pages 64 and 65.)
Strong odor.
This is temporary.
The insulation around the inside
of the oven emits an odor the
first few times the oven is used.
oven racks are difficult
to slide.
Apply a small amount of
vegetable oil to a paper towel
and wipe edges of the oven
racks with the paper towel.
Racks become dull and hard to
slide when they are left in the
oven during a self-clean cycle.
Warming drawer or
storage drawer does not
slide smoothly or drags.
The drawer is not properly
aligned with the full-extension
roller guide rails or nylon drawer
guides.
Remove and replace the drawer.
(See page 61.)
The contents in the drawer are
too heavy.
Reduce the weight and/or
redistribute the contents in the
drawer.
NX58F5300SS_AA_DG68-00509A-04_EN+MES.indb 71
3/30/2016 3:37:50 PM
