English 59
Maintaining your appliance
Maintaining your appliance
How to delay the start of self-cleaning
1.
Make sure the oven door is completely
closed.
2.
Press the
Self Clean
on the oven control
panel.
Press the pad once for a 2-hour cleaning
cycle, twice for a 3-hour cleaning cycle,
or three times for a 4-hour cleaning
cycle.
The display will show
Clean
, and the
Start
indicator will blink under the
selected cleaning cycle time.
3.
Press the
Delay Start
Pad.
The display will show
Delay
and
--:--
.
4.
Press the number pads to set the time
you want the oven to turn on,
e.g., 4, 3, 0.
The
Start
indicator will blink under the
selected Delay Start time and
Delay
on
the display.
3.
Press the
Start
Pad to start the cycle.
The display will show
Clean
and the
selected cleaning cycle time, and the
Lock
icon will blink until the door is
locked. Then the
Lock
icon will stay
on until the cycle is over and the oven
temperature is below 392 °F (200 °C).
The oven temperature will rise and hold
the preset self-clean temperature for the
duration of the selected cleaning cycle.
The display will count down the cleaning
cycle in minutes and hours.
When the time elapses, the oven will
turn off and beep 6 times.
End
will show
in the display and the
Lock
icon will
blink. When the oven temperature falls
below 392 °F (200 °C), the door unlocks
and the
Lock
icon turns off.
4.
Press the
Clear/Off
pad.
The display will go back to showing the
time of day.
NX58F5300SS_AA_DG68-00509A-06_EN+MES.indb 59
2018-08-30 12:07:33