64 English
Troubleshooting
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
Oven smokes
excessively
during broiling.
Meat or food not properly
prepared before broiling.
Cut away excess fat and/or
fatty edges that may curl.
Improperly positioned top
oven rack.
See broiling guide on
page
Controls are not being set
properly.
Greasy buildup on oven
surfaces.
Regular cleaning is necessary
when broiling frequently.
Oven will not
Self-Clean.
The oven door lock is turned
on.
The display will show the
Lock icon. Hold the oven door
open and press the START/
SET pad for 3 seconds. The
oven will beep and the Lock
icon will turn off.
The warming drawer is being
used.
Self-clean will not operate
when the warming drawer
is on.
The oven is too hot.
Let the oven cool down
and reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the
self-clean cycle can start.
The self-cleaning oven
controls are not properly set.
Reset the self-cleaning oven
controls. (See pages
and
.)
PROBLEM
POSSIBLE CAUSE
SOLUTION
Oven light
(lamp) will not
turn on.
The oven door lock is turned
on.
The display will show the
Lock icon. Hold the oven door
open and press the START/
SET pad for 3 seconds. The
oven will beep and the Lock
icon will turn off.
The Sabbath function has
been activated.
SAb and the time of day
will show in the display. All
other controls and signals
will be deactivated. To cancel
the Sabbath function and
reactivate the light switch
and other controls, press and
hold the SABBATH pad for 3
seconds.
Loose or burned-out bulb.
The switch operating the oven
light needs to be replaced.
Call for a qualified service
technician.
NX58F5300SS_AA_DG68-00509A-06_EN+MES.indb 64
2018-08-30 12:07:34