58 Español
Mantenimiento de su electrodoméstico
Mantenimiento de su electrodoméstico
• Cuando el icono de
Bloqueo
está
activado, la puerta del horno está
bloqueada.
• Cuando aparece
Loc (Bloqueo)
en la
pantalla, esto indica que la función de
bloqueo de la puerta está activada.
Mantenga presionada la tecla
Start/Set
(Inicio/Confgurar)
durante 3 segundos
para desbloquear los controles del
horno.
Cómo programar el horno para auto-limpieza
1.
Asegúrese de que la puerta del horno
esté bien cerrada.
2.
Presione la tecla
Self Clean (Auto-
Limpieza)
en el panel de control del
horno.
Presione la tecla una vez para un ciclo
de limpieza de 2 horas, dos veces para
un ciclo de 3 horas o tres veces para un
ciclo de 4 horas.
Presionar la tecla por cuarta vez volverá
a seleccionar el tiempo predeterminado
de 2 horas.
La pantalla mostrará
Clean (Limpiar)
y
el indicador
Start (Inicio)
parpadeará
debajo del tiempo del ciclo de limpieza
seleccionado.
Antes de un ciclo de auto-limpieza
NOTA
Retire las parrillas. Dejar las parrillas del horno en el horno durante un ciclo de
auto-limpieza decolorará las parrillas y hará que les sea difícil deslizarse hacia y
desde su posición.
• Asegúrese de que la función de bloqueo
de la puerta esté apagada y el horno
esté frío. De lo contrario, el ciclo de
autolimpieza no comenzará.
ADVERTENCIA
NO use los quemadores superiores mientras el horno funciona en el modo de auto-
limpieza.
NOTA
Antes de la auto-limpieza, verifique que la puerta esté bloqueada.
• Un icono de
Bloqueo
que parpadea
indica que la puerta del horno está en
proceso de bloquearse.
NX58F5300SS_AA_DG68-00509A-06_EN+MES.indb 58
2018-08-30 12:07:48