maintaining your appliance _
73
m
A
iN
tA
iN
iNG
y
our
A
pp
LiAN
ce
How to set the oven for self-cleaning
1.
Make sure the oven door is completely closed.
2.
Press the
SELF CLEAN
pad on the oven control panel.
Press the pad once for a 2-hour cleaning cycle, twice
for a 3-hour cleaning cycle, or three times for a 4-hour
cleaning cycle.
Pressing the pad a fourth time will reselect the 2-hour
default time.
The display will show
Clean
, and the
Start
indicator
will blink under the selected cleaning cycle time.
hr
3.
Press the
START/SET
pad to start the cycle.
The display will show
Clean
and the selected cleaning
cycle time, and the
Lock
icon will blink until the door is
locked. Then the
Lock
icon will stay on until the cycle is
over and the oven temperature is below 350 °F (177 °C).
The oven temperature will rise and hold the preset
self-clean temperature for the duration of the selected
cleaning cycle. The display will count down the cleaning
cycle in minutes and hours.
When the time elapses, the oven will turn off and beep
6 times.
End
will show in the display and the
Lock
icon
will blink. When the oven temperature falls below 350 °F
(177 °C), the door unlocks and the
Lock
icon turns off.
hr
hr
4.
Press the
OFF
/
CLEAR
pad.
The display will go back to showing the time of day.
User manual NX58H5 Series_DG68-00CFR.indb 73
08/02/2014 12:02:40