14
3-2 Removing the Rear Cover Panels
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating the range . Failure to do
so can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off the gas supply to the range before servicing. Check all gas lines and fittings for leaks before
operating the range . Replace all panels before operating the range . Failure to do so can result in death or
personal injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
Explanation Photo
Explanation
Cover-Wire
LT/RT
Cover-Wire LT
Cover-Wire RT
1.
Turn off the electrical supply going
to the range .
2.
Shut off the gas shut-off valve in
the gas supply line to the range .
3.
Pull the range away from the wall
so that you can access the rear
panel .
4.
Remove 2 screws from the Cover
Wire LT/RT and pull out the cover
Cover-Back
Guard Wire
Cover-Back Guard Wire
5.
Remove 2screws from the cover
and pull out the cover from the
upper back of the range
3. Di
s
assembly and Reassembly
